Read it! Before You Decide to Buy the Aspire Tigon Kit
Can I use Nicotine salt liquid with Tigon tank?
It is possible to use Nicotine salt with 1.2ohm coil, but it is not recommended with 0.4ohm coil.
What wattage should I set when I use Tigon tank.
For 1.2ohm coil, you can fire it at 10-12W, and at 23-28W for the 0.4ohm coil.
How can I change the glass of Tigon tank?
1) Unscrew to remove the top hardware
2) Detach the used glass tube with the base hardware
3) Put a new glass tube into place
4) Screw the top hardware into place
It is different when changing the glass tank of Standard version and TPD version.
For TPD version, which is child-resistant, you will need a small tool (supplied) to release the top hardware and change the glass.
What’s the coil resistance of the Tigon Tank?
The Tigon tank has a pre-installed 0.4ohm coil for light direct to lung vape experience. There is an extra 1.2ohm coil in the packing box for mouth to lung vaping.
How can I refill the Tigon tank?
1) Pull the top cap up, place your thumb on the top cap on the droplet symbol
2) Push the top cap away until the filling hole is revealed
3) Add your preferred e-liquid by pushing the tip of your filling bottle through the larger hole in the silicon leak resistant seal.
4) Slide the top cap back into place
5) Press the top cap down and back into place
Why the tank was named Tigon?
Tigon is an animal which is offspring of a male tiger and a female lion. It means 2 great properties in 1 thing. As the Tigon tank has 2 different drip tips, 2 different coils and 2 different airflow control systems. So we called the tank Tigon.
What wall adaptor should I use to charge my Tigon battery?
Please use the 5V/2A output wall adaptor.
What is the material of the Tigon coil?
The Tigon coils material is Nichrome.
How long will it take to fully charge the mod?
The mod will be full charged in 1-1.5 hours.
How can I know if I need to charge my battery?
When the device is on press the fire button, the LED light will indicate your device’s current charge.
When its current charge capacity is above 3.8 volts the indicator light will be blue and red.
When the charge is between 3.8 and 3.5 volts the light will be blue only.
When the charge drops below 3.5 volts the light will then become red to remind you that it is time to charge your device.
What’s the capacity of Tigon kit?
The Tigon tank liquid capacity is 3.5ml (standard version) and 2ml (TPD version). The Tigon battery capacity is 2600mAh, while the TPD version is 1800mAh.
Can I set the wattage or voltage with Tigon battery?
No, you can’t. The Tigon battery is only Bypass.
How do I confirm the battery is fully charged?
When the battery is fully charged, the red and blue lights will flash 20 times then remain off.
How can I change the coil of Tigon tank?
1) Unscrew to remove the base hardware
2) Remove the used coil
3) Put a new coil into the chamber
4) Screw the base hardware back onto the tank
NB: Coil can be replaced even when the tank is full.
No comments