How to Do? When SMOK G-Priv Baby Kit Prompts an Error Message
Have you heard of the latest G-Priv Baby Kit from SMOK? This is a work of great significance. At this product with a height of 72mm, a width of 51mm and a depth of 29.2mm, we will get a super output of 85W. Its biggest highlight is the 2.0 inch touch screen display. It refreshed our understanding of vape again, and before that I need to remember the tedious combination of buttons to adjust the parameters. Yes, I know that you don't like this way of doing things.
Now, the era of touch screen e-cigarettes is coming. E-cigarettes will become as simple and convenient as smartphones. No matter what changes we need to make, just click on the screen.
what do you think? But if the wrong use will also cause some wrong tips. So how do we deal with the G-Priv Kit error message?
2) BATTERY TOO LOW: The Battery voltage is lower than 3.3V. (The mod would automatically be shut down when it has warned for several times or either of the battery voltage is lower than 3.1V)
3) PCBA TOO HOT: The internal temperature is too high and the mod would automatically be shut down; you can vape again when the temperature decreased.
1. NEW COIL: A new coil will be detected in the TC Mode. Choose “Y” you’re using a new atomizer and choose “N” to confirm it’s the same one.
2. OHM TOO LOW: The resistance is lower than minimal value (In the TC Mode, the minimal value is 0.05ohm; in the VW Mode, the minimal value is 0.1ohm)
3. OHM TOO HIGH: The resistance is higher than 2.0ohm and lower than 10ohm. Please replace another atomizer.
4. ATOMIZER SHORT: The atomizer is short circuited. Please power off and change attach atomizer.
5. NO ATOMIZER: The resistance is higher than 10ohm or there’s no atomizer. Please attach another atomizer.
Now, the era of touch screen e-cigarettes is coming. E-cigarettes will become as simple and convenient as smartphones. No matter what changes we need to make, just click on the screen.
what do you think? But if the wrong use will also cause some wrong tips. So how do we deal with the G-Priv Kit error message?
Prompts about battery
1) BATTERY TOO HIGH: The Battery voltage is higher than 4.5V. Replace another one.2) BATTERY TOO LOW: The Battery voltage is lower than 3.3V. (The mod would automatically be shut down when it has warned for several times or either of the battery voltage is lower than 3.1V)
3) PCBA TOO HOT: The internal temperature is too high and the mod would automatically be shut down; you can vape again when the temperature decreased.
Prompts about atomizer
1. NEW COIL: A new coil will be detected in the TC Mode. Choose “Y” you’re using a new atomizer and choose “N” to confirm it’s the same one.
2. OHM TOO LOW: The resistance is lower than minimal value (In the TC Mode, the minimal value is 0.05ohm; in the VW Mode, the minimal value is 0.1ohm)
3. OHM TOO HIGH: The resistance is higher than 2.0ohm and lower than 10ohm. Please replace another atomizer.
4. ATOMIZER SHORT: The atomizer is short circuited. Please power off and change attach atomizer.
5. NO ATOMIZER: The resistance is higher than 10ohm or there’s no atomizer. Please attach another atomizer.
No comments