Eleaf iStick TC 60W User Manual
How to Use
Stealth on/off: Press the fire button and downside of the adjustment button simultaneously when the device is on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button one time to see current setting.
Adjustment button lock/unlock: Keep pressing upside and downside of the adjustment button simultaneously for two seconds when the device is on, then the adjustment button will be locked and the screen will display “Lock”. In the same way, the adjustment button can be unlocked and the screen will display “Unlock”. Through this operation, you can protect the adjustment button from unintentional presses and prolong its lifespan.
Switch display mode: Keep pressing upside and downside of the adjustment button simultaneously for two seconds when the device is off, the screen display will rotate 180 degrees. You can view the screen from two different angles through this operation.
Switch among VW /TC-Ni/TC-Ti modes: Long press the menu button to switch modes.
1) In VW Mode: Adjust wattage: In VW mode, the output wattage can be adjusted from 1W to 60W by pressing upside or downside of the adjustment button, upside to increase and downside to decrease. Long press upside or downside of the adjustment button can rapidly increase or decrease the wattage level.
2) In TC-Ni/TC-Ti Mode: When using TC-Ni mode, the screen shows “Ni”, and the Nickel 200 coil is our recommended coil. When using TC-Ti mode, the screen shows “Ti”, and Titanium coil is compatible with this mode.
Note: In TC-Ni/TC-Ti mode, please make sure the coil is at room temperature when first used with the iStick TC60W.
Adjust wattage: In TC-Ni/TC-Ti mode, the output wattage can be adjusted from 1W to 60W. Keep pressing the menu button and upside of the adjustment button simultaneously without looseness to increase the wattage level. On the contrary, keep pressing the menu button and downside of the adjustment button simultaneously without looseness to decrease the wattage level.
Adjust temperature: In TC-Ni/TC-Ti mode, temperature can be adjusted from 100-315℃ or 200-600℉ by pressing upside or downside of the adjustment button, upside to increase and downside to decrease. Long press upside or downside of the adjustment button can rapidly increase or decrease temperature setting.
Lock/Unlock atomizer resistance: In TC-Ni/TC-Ti mode, keep pressing the fire button and upside of the adjustment button simultaneously for two seconds to lock or unlock atomizer “base resistance”. The lock sign will appear when resistance is locked and “Ω” symbol will come back when unlocked.
Note: Please lock the resistance when the coil is at room temperature so that the device can display the correct “base resistance”. In lock mode, when you remove the coil and then put it back, the device can maintain the same “base resistance” although the coil resistance may increase due to the rise of temperature. In unlock mode, when you remove the coil and then put a coil back, the screen may display “New coil up same down” as the coil resistance may increase within certain range. If it is the same coil, press the downside of the adjustment bottom and if it is a new coil, press the upside of the adjustment button. But please unlock the resistance when you want to change an atomizer of different resistance.
How to replace the front and back panels
1.First open the back panel from the notch.
3.Finally you can replace them with panels of different color.
Properties
Atomizer Protection: When vaping time exceeds ten seconds, the output shuts off automatically with “Over 10s” display on the screen. Atomizer Short-circuit & No
Atomizer Protection: When atomizer short-circuit occurs, the OLED screen will display “Atomizer Short”. The screen will display “No Atomizer” when there is no atomizer connected.
Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will display “Lock”. Charge the battery to unlock the device.
Temperature Protection: In TC-Ni/TC-Ti mode, if the actual temperature of coil is higher than the set temperature, the screen shows "Temp Protection".
Temperature Alert: If the temperature of device is over alert temperature, the output will shut off automatically and the screen will display “Device Too Hot”. You can continue to vape after it cools down.
- On the magnetic front panel, there are two silkscreen markers named “Eleaf TM” and “iStick TC60W”.
1. Only have your iStick TC60W repaired by Eleaf. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the iStick TC60W in high temperatures or damp conditions, otherwise it may be damaged. The appropriate operation temperature is within 0℃to45℃ while charging and -10℃ to 60℃ while using.
3. Do not attempt to combine the iStick TC60W with parts from other brands of e-cigarettes. If it is damaged in this way, our company will not take on responsibility and your warranty will be void.
You can buy the Eleaf iStick TC 60W mod on Eleaf® iStick E-Cigarettes Vape Online Store.
No comments