Eleaf GS Baby Tank Guide - Vape Broschüre - deutsch

Gebrauchsanleitung 

1. Die Verdampferbasis vom Verdampfer abschrauben;

2. Träufeln Sie ein paar Tropfen e-Liquid direkt auf den Verdampferkern, um die Spule innen, vor dem Vapen, vollständig zu tränken;

3. Schrauben Sie den getränkten Verdampferkern fest auf die Verdampferbasis;

4. Befüllen Sie den Tank langsam mit e-Liquid durch einen der beiden Seitenschlitze; (Hinweis:  Bitte nie e- Liquid in das Mittelloch des Kamins einfüllen, bitte nicht überfüllen.)

5. Die Verdampferbasis mit dem getränkten Verdampferkern auf die Tanksektion festschrauben;

6. Den Lufteinlaß durch drehen des Luftzufuhreinstellrings einstellen und der Verdampfer ist betriebsbereit. Garantie Wir sind nicht für Schäden die durch unsachgemäße Nutzung verursacht wurden verantwortlich. Unsere Garantie bezieht sich auf die gesetzliche Gewährleistung.

Warnung 

1. Das Gerät vor Kindern fernhalten.

2. Das Gerät wird nicht empfohlen für Jugendliche, Nichtraucher, schwangere oder stillende Frauen oder Personen mit allergischen Reaktionen auf Nikotin.

Bitte Beachten: 

1. Versuchen Sie bitte nicht das Gerät selbständig zu reparieren um weitere Schäden und/oder Personenschäden zu vermeiden.

2. Setzen Sie das Gerät nicht hohen Temperaturen und hoher Luftfeuchtigkeit aus, dies kann dem Gerät schaden.

3. Verwenden Sie das Gerät nur zum „Vapen“ und nicht für andere Zwecke. Vermeiden Sie e-Liquid zu verschlucken. 

Mögliche Nebenwirkungen

1. Dieses Produkt kann gesundheitsschädlich sein und Nikotin enthalten welches süchtig macht.

2. Wir empfehlen Menschen, die starke Reaktionen nach dem Gebrauch dieses Produkts zeigen, e-Liquid mit geringeren Nikotingehalt oder ohne Nikotin zu verwenden.

2018 Newest RDA | Geekvape Baron RDA Rebuildable Dripping Atomizer 24mm | Open Box Video

Geekvape Baron RDA is a multifunctional airflow system that allows easy adjustments. It comes with airflow cover with retaining ring design which can minimize leakage. And one-piece airflow cap placed in a fixed position that ensures airflows are always in the correct position. The rebuildable dripping atomizer is 24mm in diameter. It adopts two posts deck for easy coil building. In addition, resin drip tip, PMMA drip tip, standard 510 pin, and squonk 510 pin are included.

1、Multifunctional airflow system allows easy adjustments

2、Two post deck easy to build

3、Airflow cover with retaining ring design to minimize leakage

4、One-piece airflow cap placed in a fixed position
* Ensures airflows are always in the correct position
* Easy airflow adjustments

5、Resin drip tip and PMMA drip tip included

6、Standard 510 and BF squonk 510 pin included

Package includes

 GeekVape Baron RDA Atomizer x 1
 Feather Cotton x 1
 510 Drip Tip Adapter x 1
 Coil x 2
 User Manual x 1
 Spare Parts Pack x 1
 GV Flathead Screwdriver x 1
 Hex Wrench x 1
 810 Drip Tip x 1
 Promotion Card & Warranty Card x 1

Open Box Video

Do you like it? Would you like to pick it up? Actually, no matter from the angle of price or quality, it is worthy of your consideration.

How to Use IJOY CAPO 100 BOX MOD - Quick Start

Thank you for choosing IJOY! Please read this manual carefully to ensure
proper use. For additional information regarding this product or its use, please
consult your local UOY retailer or visit our website www.ijoycig.com

Product Introduction: 

The IJOY CAPO 100 BOX MOD is a powerful and compact device paired with the industries most innovative 21700 battery line. IJOY 21700 battery is another amazing battery after IJOY 20700 battery which features fantastic battery life and high discharge rate with 3750 mAh rated capacity and 40A continuous discharge maximum Providing outstanding pe rforma nee and vaIue, IJOY 21 700 battery is included in the kit that drives the IJOY CAPO 100 up to 100w and dramatically shrinks down the size IJOY CAPO 100 Mod.

Parameter

1 * IJOY CAPO 100 BOX MOD
1* 21700 batteries included
1* CAPTAIN MINI SU BOHM TANK
1*CA-M1 Coil 0.5ohm Head (30-60W)
1*CA-M2 Coil 0.3ohm Head (40-BOW)
1• Warranty Card
1* USB Cable
1 * Manual
1 *Tool Pack (Screws, Allen key, 0-rings)

Specifications

• Screen size: 0.96"0LED.
• Size: 52*28*78mm /2.04*1. 10*3 07 inches.
• Max Wattage·1 OOW
• Big size fire button
• Top battery slot
• No overhang with 26 mm tanks
• Thread type: 51 O thread
• NI/TI/SS temperature control
• TCR function
• Unique Custom User Mode
• Resistance Range: 0 05-3 0 ohm
• USB port charging support
• Firmware Upgradeable

IJOY CAPO 100 Operation Instruction: 

1. Power On/off

Press the fire button 5 times in quick succession to turn the device on and off. After switch on,OLED display Captain PD270 logo and software version number at stand by mode.


(Note: Please adjust the wattage to a proper range to match the atomizer you used before using.

2.Vaping 

While the device is power on,just keep pressing the fire button to vape
(Firing timeout: 10 Seconds)
While the device is power on, the OLED screen default display VW Mode.

Sinuous FJ200 Mod has Some Problems - Wismec Instruction

The Setting of Preheat Function: 

(1). When powered on, press the fire button and right regulatory button simultaneously and then you enter the preheat setting menu.
(2). Press the fire button to switch between preheat power and preheat duration.
(3). Press the left or right regulatory button to decrease or increase the parameter.
(4). Long press the fire button to confirm.

Adjustable Timeout Duration: 

Due to different vaping habits, you’re allowed to set the timeout duration from 5 to 15 seconds as you prefer. Press the fire button and right regulatory button simultaneously to enter into the menu system. Press the right regulatory button to enter the timeout duration setting. Press the left regulatory button to set the duration and then press the fire button to confirm.

Once the duration is set (like 5 seconds), when you hold the fire button and vape over the pre-set time, it’ll display “OVER 5S PROTECT” and shut down automatically. Press the fire button 5 times to restart.

Charging Protection (ENU): 

While charging, if the temperature of the device is higher than 45℃, it’ll display “Battery Too Hot”. On the contray, if the temperature is lower than -5℃, it’ll display “Battery Too Cold”. While charging, when the temperature of the device reaches to 50℃ or higher, the device will stops charging until the temperature drops down to 45℃ or lower.

The Setting of ENU: 

(1). When powered on, press the fire button and right regulatory button simultaneously and then you enter the
menu system. (2). Press the right regulatory button two times to enter the ENU menu. (3). Press the left regulatory button to shift between “ON” and “OFF”. (4). Press the fire button to confirm.

2018 Newest Tank | HugsVape Magician Mesh Subohm Tank 24mm 3ml/5ml | Preview

HugsVape Magician Mesh Subohm Tank features stainless steel, with 24mm diameter and 3ml e-liquid capacity (5ml with bubble glass).

With the top push to fill system, you can easily refill e-juice.

All parts of the Magician Mesh Tank can be detached and reassembled, bringing more convenience to clean it.

The tank can work with 0.15 ohm dual mesh coil (65-95W) and 0.13 ohm triple mesh coil (85-115W), which are made of Kanthal, delivering different vaping experience.

Packing List

•  HugsVape Magician Mesh Sub Ohm Tank 3ml
•  Triple Mesh Coil (Pre-installed)
•  Dual Mesh Coil
•  510 Drip Tip Adapter
•  User Manual
•  Glass Tube 5ml
•  Spare Parts

HOW CAN I GET THE NAUTILUS GLASS TANK? - Aspire Instruction

HOW CAN I GET THE NAUTILUS GLASS TANK?

The glass tank is the accessory of nautilus, using the threaded glass technology, which is very demanding on the quality, so we now have a big problem on the product supply due to the low yield of glass tube, so there is no replacement glass tank in the market yet.

But we are now trying our best to solve this problem, and we have found several stable glass manufacturers to produce the glass tube.
Sincerely sorry for making you wait so long time to get the replacement, we will finish the thorough settlement of tank supply as soon as possible and send to all of our distributors,and then you can get one from your local shop.