Innokin EQ Pod Starter Kit Review | Best High-Nicotine Experience

Mesh coil became the most popular type of coil in 2018. Not only because it provides a low resistance vaping effect, but also its super heating effect. It's not that simple, here you will get two output modes, regular mode and boost mode. So What does it feel like? Let me share with you the Innokin EQ Pod Starter Kit Review.

On this device, you get a button. This is a our usual fire button, we can use it to turn on/off and switch output mode. This is a bit strange, because you need to switch the output mode when you turn off the Pod kit. Red light stands for boost mode and white stands for regular mode. After confirming, you can press the button three times to turn on the EQ Kit.

The EQ Kit is paired with a 0.5 ohm mesh coil, so it is recommended that You do not try the salt-nico to avoid damage to the throat and lungs. Because at 0.5 ohm coil, more vapor is produced, and if you perform salt-nico vaping, a large amount of nicotine will be absorbed in an instant.

This Way you are no longer feeling comfortable, but a strong burn and tingling sensation. But it supports me for high-nicotine e-juice vaping. It not only brings better atomization, but also brings me the vapor feel and temperature. The size allows me to carry it in my pocket easily. The most important 800mAh internal battery gives me a longer lasting vaping time. In short, it is still a good portable device

How to Do? When SMOK G-Priv Baby Kit Prompts an Error Message

Have you heard of the latest G-Priv Baby Kit from SMOK? This is a work of great significance. At this product with a height of 72mm, a width of 51mm and a depth of 29.2mm, we will get a super output of 85W. Its biggest highlight is the 2.0 inch touch screen display. It refreshed our understanding of vape again, and before that I need to remember the tedious combination of buttons to adjust the parameters. Yes, I know that you don't like this way of doing things.

Now, the era of touch screen e-cigarettes is coming. E-cigarettes will become as simple and convenient as smartphones. No matter what changes we need to make, just click on the screen.

what do you think? But if the wrong use will also cause some wrong tips. So how do we deal with the G-Priv Kit error message?

Prompts about battery

1) BATTERY TOO HIGH: The Battery voltage is higher than 4.5V. Replace another one.

2) BATTERY TOO LOW: The Battery voltage is lower than 3.3V. (The mod would automatically be shut down when it has warned for several times or either of the battery voltage is lower than 3.1V)

3) PCBA TOO HOT: The internal temperature is too high and the mod would automatically be shut down; you can vape again when the temperature decreased.

Prompts about atomizer

1. NEW COIL: A new coil will be detected in the TC Mode. Choose “Y” you’re using a new atomizer and choose “N” to confirm it’s the same one.

2. OHM TOO LOW: The resistance is lower than minimal value (In the TC Mode, the minimal value is 0.05ohm; in the VW Mode, the minimal value is 0.1ohm)

3. OHM TOO HIGH: The resistance is higher than 2.0ohm and lower than 10ohm. Please replace another atomizer.

4. ATOMIZER SHORT: The atomizer is short circuited. Please power off and change attach atomizer.

5. NO ATOMIZER: The resistance is higher than 10ohm or there’s no atomizer. Please attach another atomizer.

How to Use SMOK TFV12 Prince Vape Atomizer | User Manual

If you are familiar with SMOK products, then you must often hear the word "Cloud Beast"! SMOK products have been loved by many players with massive vapor, so will the new Cloud Beast members bring us a new experience? I think you need to know about TFV12 Prince Atomizer.

This is an Atomizer with 8ML e-juice storage. The large e-juice capacity makes it better to match the fast consumption of e-juice under high-power vaping. The V12 series coil will kill the biggest highlight of the TFV12 series. SMOK not only uses better cotton, but also upgrades the Atomizer coil structure. Mesh coil will give us a more impactful vaping experience. So how to use TFV12 Prince Tank?

How to fill with e-liquid

1) Hold the tank with one hand, and use another one to move the top cap counter clockwise.

2) Add e-liquid through the slot, and pay attention not to drip in into the central airflow tube.

3) Close the cap tightly with care. Let the tank stand for several minutes to completely saturate the organic cotton.

Replace atomizer core:

Firstly, unscrew the base, then unscrew the coil head from the base, hen secure your new coil head onto the base plate (ensure that it is screwed in securely), finally screw the new coil head into chimney and you’re ready to prime your new coil head.

Control air input:

Rotate the bottom adjustable airflow system to control air input.